Insulation Anchors & Insulation Hangers
-
Please click the Request Information button to configure your Insulation Anchor (Hanger), Spindle, Perforated Base.
Materials
Low Carbon Steel - PIN / Plate
Mechanical Properties
Low Carbon Steel - Plate
Also available by special order in all Stainless Steel or all Aluminum
Plating
Pin - Galvanized coating is standard.
Plate - Galvanized is standard.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Size - D
12 GA (0.105") is standard.
Other sizes available by special order only.
Length - L
1", 1-5/8", 2", 2-1/2", 3-1/2", 4-1/2", 5-1/2". 6-1/2", 8" and 9" are standard.
Other lengths available by special order.
Please click the Request Information button to configure your Insulation Anchor (Hanger), Spindle, Perforated Base. -
Materials
Low Carbon Steel - PIN / Plate
Mechanical Properties of our Self Stick Insulation Anchors
Low Carbon Steel - Plate
Also available by special order in all Stainless Steel or all Aluminum.
Plating
Galvanized coating is standard. - PIN / Plate
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Size - D
12 GA (0.105") is standard.
Other sizes available by special order only.
Length - L
1", 1-5/8", 2", 2-1/2", 3-1/2", 4-1/2", 5-1/2". 6-1/2", 8" and 9" are standard.
Other lengths available by special order.Please click the Request Information button to configure your Self-Stick Insulation Anchors (Hangers). -
Materials
This is a one-piece insul-anchor of molded nylon.
Washers
The self-locking washer for use with this insul-anchor is the WAMS-120-156. These washers are packed with anchors.
Size - D
5/32" Standard
Length - L
2-1/2" Standard
Features- Can be used for insulation up to 2" thick.
- Has a base area 14% larger than similar nylon anchors with a round base.
- Has 21% more perforated area for glue extrusion than similar nylon anchors.
- Uses 30% less adhesive than metal insul-anchors with a 2" round base.
- Will not conduct heat or cold.
- Lighter in weight than metal anchors for ease of handling.
-
Materials
Low Carbon Steel - Plate / Bolt
Mechanical Properties
Low Carbon Steel
Available by special order only.
Plating
Galvanized is standard - Plate
Copper plating is standard - Bolt
Retaining Cap
The cap for use with this anchor-bolt is the MCAL part no. MCAL-625-875.
Size - D
3/16 nominal. Actual ring diameter is 0.175".
Length - L
7/8, 1-7/8, 2-7/8, and 3-7/8 are standard.
Other lengths available by special order.
Please click the Request Information button to configure your Anchor Bolt, Annular Ring, Perforated Base. -
Materials
Low Carbon Steel - Plate / Bolt
Mechanical Properties
Low Carbon Steel
Available by special order only.
Plating
Galvanized plating is standard - Plate
Copper plating is standard - Bolt
Hardware
Hex nuts, flat washers and lock washers are available in a variety of materials.
Size - D
#10-24 is standard.
Other sizes available by special order.
Length - L
3/4" to 3" long, in 1/4" increments as standard.
Other lengths available by special order.Please click the Request Information button to configure your Threaded Anchor Bolt (Perforated Base). -
Please click the Request Information button to configure your Safing "Z" Clip.
Plating
Galvanized is standard.
Application
For use in installation of fire barrier and sound barrier safing insulations. This non-welded fastener is used as a support bracket to impale and secure Insulating materials between floor slab and spandrels at floor edge or anywhere that support for material is required.
Standard Packaging
500 per carton (43 lbs. carton weight - approximately)
Size
2" x 3" x 3" x 1" standard size
Length
20 Gauge, Mild Steel
Please click the Request Information button to configure your Safing "Z" Clip.