Capacitor Discharge Weld Pins & Arc Weld Pins
weld-pins
Materials
Low Carbon Steel
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Aluminum
Alloy - 1110-H14 std.
Other alloys available upon request.
Mechanical Properties
Low Carbon Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades are available upon request
Aluminum
Values for various grades are available upon request
Plating
Galvanized and Copper plating are available for Low Carbon Steel.
Annealing
Low Carbon Steel pins are annealed when required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
This is the standard weld pin used for most applications.
Please click the Request Information button to configure your Capacitor Discharge (CD) Weld Pins.
/Asset/a1001.jpg
Materials
Low Carbon "Mild" Steel
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon "Mild" Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon "Mild" Steel
Annealing
Low Carbon "Mild" Steel can be annealed if required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
Ideally suited for welding to surfaces covered with mill scale, rust, or paint without costly preparation.
Please click the Request Information button to configure your "Power Tip" Capacitor Discharge (CD) Weld Pins.
/Asset/a1004.jpg
Materials
Low Carbon "Mild" Steel
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon "Mild" Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon "Mild" Steel
Annealing
Low Carbon "Mild" Steel can be annealed if required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
Ideally suited for welding to surfaces covered with mill scale, rust, or paint.
Please click the Request Information button to configure your "Sure Fire" Capacitor Discharge (CD) Weld Pins.
/Asset/a1006.jpg
Materials
Aluminum
Alloy - 1100-H14 std.
Other alloys available upon request.
Mechanical Properties
Aluminum
Values for various alloys available upon request.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
Ideally suited for welding with production Stud Welding systems and for STUCCO embossed panels.
Please click the Request Information button to configure your Conical Tip Capacitor Discharge (CD) Weld Pins.
/Asset/a1008.jpg
*Other diameters available upon request.
Materials
Low Carbon Steel
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon Steel
Annealing
Low Carbon Steel can be annealed where required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
This is the standard weld pin used when only arc stud welding equipment is available.
Ferrules
Ferrules are component parts of studs. Not sold separately.
Please click the Request Information button to configure your Double Pointed (Arc) Weld Pins.
/Asset/a1010.jpg
*Other diameters available upon request.
Materials
Low Carbon Steel
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon Steel
Annealing
Low Carbon Steel can be annealed where required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
This is the standard insulation fastener used to secure insulation to wire road mesh.
Please click the Request Information button to configure your J-Hook (Weld Pin).
/Asset/a1014.jpg
Capacitor Discharge (CD) Weld Pins
| Size | D | FD (Steel) | FD (Aluminum) |
| 14GA | 0.080 | 0.160 | - |
| 12GA | 0.105 | 0.180 | 0.230 |
| 3MM | 0.118 | 0.190 | 0.240 |
| 10GA | 0.135 | 0.195 | 0.250 |
Materials
Low Carbon Steel
| C - 0.23% max. | P - 0.04% max. |
| Mn - 0.90% max. | S - 0.05% max. |
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Aluminum
Alloy - 1110-H14 std.
Other alloys available upon request.
Mechanical Properties
Low Carbon Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades are available upon request
Aluminum
Values for various grades are available upon request
Plating
Galvanized and Copper plating are available for Low Carbon Steel.
Annealing
Low Carbon Steel pins are annealed when required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
This is the standard weld pin used for most applications.
"Power Tip" Capacitor Discharge (CD) Weld Pins
| Size | D | L | FD |
| 12GA | 0.105 | AS REQUIRED | 0.171 |
| 10GA | 0.135 | AS REQUIRED | 0.187 |
Materials
Low Carbon "Mild" Steel
| C - 0.23% max. | P - 0.04% max. |
| Mn - 0.90% max. | S - 0.05% max. |
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon "Mild" Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon "Mild" Steel
Annealing
Low Carbon "Mild" Steel can be annealed if required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
Ideally suited for welding to surfaces covered with mill scale, rust, or paint without costly preparation.
"Sure Fire" Capacitor Discharge (CD) Weld Pins
| Size | D | L | FD |
| 12GA | 0.105 | AS REQUIRED | 0.175 |
| 10GA | 0.135 | AS REQUIRED | 0.195 |
Materials
Low Carbon "Mild" Steel
| C - 0.23% max. | P - 0.04% max. |
| Mn - 0.90% max. | S - 0.05% max. |
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon "Mild" Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon "Mild" Steel
Annealing
Low Carbon "Mild" Steel can be annealed if required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
Ideally suited for welding to surfaces covered with mill scale, rust, or paint.
Conical Tip Capacitor Discharge (CD) Weld Pins
| Size | D | L | FD |
| 12GA | 0.105 | AS REQUIRED | 0.220 |
| 10GA | 0.135 | AS REQUIRED | 0.250 |
Materials
Aluminum
Alloy - 1100-H14 std.
Other alloys available upon request.
Mechanical Properties
Aluminum
Values for various alloys available upon request.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
Ideally suited for welding with production Stud Welding systems and for STUCCO embossed panels.
Double Pointed (Arc) Weld Pins
| Size | D* | L | Ferrule Code |
| 10GA | 0.135 | AS REQUIRED | F135 |
Materials
Low Carbon Steel
| C - 0.23% max. | P - 0.04% max. |
| Mn - 0.90% max. | S - 0.05% max. |
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon Steel
Annealing
Low Carbon Steel can be annealed where required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
This is the standard weld pin used when only arc stud welding equipment is available.
Ferrules
Ferrules are component parts of studs. Not sold separately.
| FERRULE | |||||
| Code | B | D | E | M | Part No. |
| F135 | 0.281 | 0.375 | 0.156 | 0.390 | 092 0005 04 |
J-Hook (Weld Pin)
| Size | D* | L |
| 10GA | 0.135 | AS REQUIRED |
Materials
Low Carbon Steel
| C - 0.23% max. | P - 0.04% max. |
| Mn - 0.90% max. | S - 0.05% max. |
Stainless Steel
AISI grade - 302/304/305 std.
Other grades available upon request.
Mechanical Properties
Low Carbon Steel
Tensile - 60,000 psi (min.)
Yield - 50,000 psi (min.)
Elongation - 20% (in 2 inches)
Stainless Steel
Values for various grades available upon request.
Plating
Galvanized and Copper plating are available for Low Carbon Steel
Annealing
Low Carbon Steel can be annealed where required.
Washers
Self-locking washers are available in a variety of sizes, shapes, and materials.
Application
This is the standard insulation fastener used to secure insulation to wire road mesh.
