To Buy The Sure Shot II Welder click the request information above.

SureShotII is a CD Pin Welder for Cupheads, Mini-Cups, Weld Pins and Weld Studs. Part of the Ultra-Portable series by MIDWEST, this system features weld power up to a 5/16” (M8) weld base and operates on 110VAC -OR- 220VAC. Weighing only 18 pounds, the Hybrid Transformer/Microprocessor Unit works in all conditions on all popular Insulation applications and more.

Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)

Request Information
Unit of Measure
Items
Buy The Sure Shot II CD Welder

SureShotII Capacitor Discharge Welder
Weld System N/A SureShotll
Maximum Weld Diameter N/A
Maximum Weld Diameter (Decimal) N/A 0.3125 in
Maximum Weld Diameter (Fraction) N/A 5/16 in
Minimum Weld Length N/A 6 mm
Minimum Weld Length (Decimal) N/A 0.250 in
Minimum Weld Length (Fraction) N/A 1/4 in
Weldable Material N/A Aluminum Mild Steel Stainless
Incoming Power (Voltage) N/A 115 V
Special Features Available N/A Cuphead (Mini-Cup) Pins
Backside Marking on Thinner Material N/A Unacceptable
Minimum Material Thickness N/A 0.03125 in (22 gauge) 0.6 mm (22 gauge)
Weld Penetration N/A Surface Weld, Fail-in-fastener Minimum
Weight N/A 18 lb8.2 kg
Incoming Voltage (AC) N/A 110 V220 V
Current at 110 Incoming Voltage (AC) N/A 15 A
Current at 220 Incoming Voltage (AC) N/A 7.5 A
Frequency at 110 Incoming Voltage (AC) N/A 50 Hz
Frequency at 220 Incoming Voltage (AC) N/A 60 Hz
Outgoing Voltage (DC) N/A 35 to 160 V
Outgoing Current N/A 3000 to 9000 A
Welding Current N/A DC
Welding Capacitance N/A 100,000 µF
Pin/Stud Range N/A

14 ga. thru 5/16" dia. Weld Base (3 mm to M8)
Weld Rate N/A 24 welds per Minute at Max. Voltage
Charge Time N/A <3 seconds @ Max. Charge
Mode N/A Capacitor Discharge/Contact
Weld Gun Weight1 N/A 1.6 lb0.73 kg
Size (LWH) N/A 4-7/8 x 2 x 5-3/4 in124 x 51 x 146 mm
Material N/A High strength, impact resistant polycarbonate
Ground Cable N/A #4 x 15 ft. (4.6 m) - one each
Gun Cable Set N/A #4 x 18/2 x 20 ft. (6.1 m) - direct from gun
Operational Specifications N/A
  • Indicator Lights (3)
  • Resettable Breaker
  • Thermal Fan
  • Safety Shutdowns
  • 7-Segment Digital Display
Stud to Base Weld Area N/A No Special Requirements
  • 1 Not including cable

Your Single Source Stud Welding Specialists

Contact Us