MIDWEST's standard Cuphead portable, the TALON includes all the features of the EAGLE pin system, plus Cuphead components and capability making this one of the key Insulator machines in the MIDWEST line.

Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)

Request Information
Unit of Measure
Items
Talon Capacitor Discharge CD Weld Stud System

Talon Capacitor Discharge Stud Welder
Weld System N/A Talon
Maximum Weld Diameter N/A
Maximum Weld Diameter (Decimal) N/A 0.250 in
Maximum Weld Diameter (Fraction) N/A 1/4 in
Minimum Weld Length N/A 6 mm
Minimum Weld Length (Decimal) N/A 0.250 in
Minimum Weld Length (Fraction) N/A 1/4 in
Weldable Material N/A Aluminum Mild Steel Stainless
Incoming Power (Voltage) N/A 115 V
Special Features Available N/A Cuphead (Mini-Cup) Pins
Backside Marking on Thinner Material N/A Unacceptable
Minimum Material Thickness N/A 0.03125 in (22 gauge) 0.6 mm (22 gauge)
Weld Penetration N/A Surface Weld, Fail-in-fastener Minimum
Width N/A 10 in
Depth N/A 13 in
Height N/A 8-1/2 in
Weight N/A 29 lb
Weld Rate N/A Up to 20/min
Pin/Stud Range N/A 14 GA. thru 1/4" Dia. Weld Base
Weld Voltage (DC) N/A 35 to 175 V
Capacitance N/A 70,000 µF
Weld Mode N/A Contact Cuphead
Voltage (AC) N/A 115 V
Current N/A 20 A
Frequency N/A 60 Hz
Weight (Not Including Cable) N/A 1.6 lb
Size (LWH) N/A 4-7/8 x 2 x 5-3/4 in
Material N/A High strength impact-resistant polycarbonate
Ground Cable N/A #4 x 15 ft (One Each)
Gun Extension Set N/A #4 x 18/2 x 35 ft (Direct to Gun)
Stud to Base Weld Area N/A No Special Requirements

Your Single Source Stud Welding Specialists

Contact Us