Stud Welding Range
  • 10 gauge (3mm) through 5/8” (M16) diameter studs
Standard Features
  • Three-Phase Transformer, Rectifier
  • Variable Voltage Input 230/460/575
  • Continuous Current Control up to 1200Amps
  • Continuous Time Control .05 to 1.0 seconds
  • Solid-State Circuitry
  • Manual Welding function capable
  • Complete System includes Standard Duty Weld Gun, Ground Cable, and Extension Cable Set.
Unit of Measure

Key Features

Weld System

N/A UA 1000

Maximum Weld Diameter

N/A M16

Maximum Weld Diameter (Decimal)

N/A 0.625 in

Maximum Weld Diameter (Fraction)

N/A 5/8 in

Minimum Weld Length

N/A 20 mm

Weldable Material

N/A Aluminum Mild Steel Stainless

Specifications

Minimum Weld Length (Decimal)

N/A 0.750 in

Minimum Weld Length (Fraction)

N/A 3/4 in

Incoming Power (Voltage)

N/A 230 V460 V575 V

Width

N/A 22-1/4 in

Depth

N/A 35-3/4 in

Height

N/A 30 in

Weight

N/A 500 lb

Stud to Base Weld Area

N/A Air/Fluid "Tight"

Secondary Features

Backside Marking on Thinner Material

N/A Acceptable

Minimum Material Thickness

N/A 0.109 in (12 gauge) 3 mm (12 gauge)

Weld Penetration

N/A Penetration Weld, Structural Strength

Stud Welding Properties

Standard Features

N/A 1 stud welding gun with legs and foot piece 25 ft. (7.62m) of 1/0 ground cable with "C" clamp 50 ft. (15.24m) of 1/0 combination cable

Welding Range

N/A 10 gauge (3mm) through 5/8" (M16) diameter studs

Duty Cycle

N/A 1/2" (M14) 14/min. 3/8" (M10) and less – unlimited 5/8" (M16) 10/min.

Manual Welding Properties

Output Current at 38 V 60%

N/A 450 A

Welding Range

N/A 20 to 590 A

Your Single Source Stud Welding Specialists

Contact Us