Your Single Source Stud Welding Specialists
MIDWEST Fasteners' basic pin welder, is a solid-state Capacitor Discharge stud welder. Capable of welding Weld Pins and Weld Studs up to 1/4" weld base in Mild Steel, Stainless & Aluminum materials, EAGLE's standard features make it both portable and flexible for all standard applications.

Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)

CD Stud Welders

CD Weld Equipment

Unit of Measure

Specifications

Width

N/A 10 in

Depth

N/A 13 in

Height

N/A 8-1/2 in

Weight

N/A 26 lb

Weld Rate

N/A Up to 20/min

Weldable Materials

N/A Aluminum Mild Steel Stainless Steel

Pin/Stud Range

N/A 14 GA. thru 1/4" Dia. Weld Base

Weld Voltage (DC)

N/A 35 to 175 V

Capacitance

N/A 70,000 µF

Weld Mode

N/A Contact

Power Requirement

N/A 115 VAC 20 Amp 60 Hz

Fastener Length

N/A 1/4" - Unlimited 6 mm - Unlimited

Thickness of Weldable Material

N/A 0.6 mm - Unlimited 25 gauge - Unlimited

Weld Type

N/A Surface Weld

Backside Marking

N/A Unacceptable

Stud to Base Weld Area

N/A No Special Requirements

Weld Gun (Talon CD)

Weight

N/A 1.6 lbs (Not Including Cable)

Size (LWH)

N/A 4-7/8" x 2" x 5-3/4"

Weldable Diameter

N/A 14 Ga. thru 1/4"

Material

N/A High strength impact-resistant polycarbonate

Cables

Ground Cable

N/A #4 x 15 Ft. (One Each)

Gun Extension Set

N/A #4 x 18/2 x 35 Ft. (Direct to Gun)
© 2018, Midwest Fasteners.Site created by Thomas Web Solutions and powered by Navigator Platform