MIDWEST's standard Cuphead portable, the TALON includes all the features of the EAGLE pin system, plus Cuphead components and capability making this one of the key Insulator machines in the MIDWEST line.
Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)
Unit of Measure
Key Features
|
Secondary Features
|
Specifications
|
Power Requirement
|
Weld Gun (Talon CD)
|
Cables
Key Features
Weld System |
N/A Talon |
Maximum Weld Diameter |
N/A M6 |
Maximum Weld Diameter (Decimal) |
N/A 0.250 in |
Maximum Weld Diameter (Fraction) |
N/A 1/4 in |
Minimum Weld Length |
N/A 6 mm |
Minimum Weld Length (Decimal) |
N/A 0.250 in |
Minimum Weld Length (Fraction) |
N/A 1/4 in |
Weldable Material |
N/A Aluminum Mild Steel Stainless |
Incoming Power (Voltage) |
N/A 115 V |
Special Features Available |
N/A Cuphead (Mini-Cup) Pins |
Secondary Features
Backside Marking on Thinner Material |
N/A Unacceptable |
Minimum Material Thickness |
N/A 0.03125 in (22 gauge) 0.6 mm (22 gauge) |
Weld Penetration |
N/A Surface Weld, Fail-in-fastener Minimum |
Specifications
Width |
N/A 10 in |
Depth |
N/A 13 in |
Height |
N/A 8-1/2 in |
Weight |
N/A 29 lb |
Weld Rate |
N/A Up to 20/min |
Pin/Stud Range |
N/A 14 GA. thru 1/4" Dia. Weld Base |
Weld Voltage (DC) |
N/A 35 to 175 V |
Capacitance |
N/A 70,000 µF |
Weld Mode |
N/A Contact Cuphead |
Stud to Base Weld Area |
N/A No Special Requirements |
