MIDWEST Fasteners' basic pin welder, is a solid-state Capacitor Discharge stud welder. Capable of welding Weld Pins and Weld Studs up to 1/4" weld base in Mild Steel, Stainless & Aluminum materials, EAGLE's standard features make it both portable and flexible for all standard applications.
Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)
| Items |
CDSW-005-01 Eagle Capacitor Discharge Stud Welder |
|
| Weld System | Eagle | |
| Maximum Weld Diameter | ||
| Maximum Weld Diameter (Decimal) | 0.250 in | |
| Maximum Weld Diameter (Fraction) | 1/4 in | |
| Minimum Weld Length | 6 mm | |
| Minimum Weld Length (Decimal) | 0.250 in | |
| Minimum Weld Length (Fraction) | 1/4 in | |
| Weldable Material | Aluminum Mild Steel Stainless | |
| Incoming Power (Voltage) | 115 V | |
| Backside Marking on Thinner Material | Unacceptable | |
| Minimum Material Thickness | 0.03125 in (22 gauge) 0.6 mm (22 gauge) | |
| Weld Penetration | Surface Weld, Fail-in-fastener Minimum | |
| Width | 10 in | |
| Depth | 13 in | |
| Height | 8-1/2 in | |
| Weight | 26 lb | |
| Weld Rate | Up to 20/min | |
| Pin/Stud Range | 14 GA. thru 1/4" Dia. Weld Base | |
| Weld Voltage (DC) | 35 to 175 V | |
| Capacitance | 70,000 µF | |
| Weld Mode | Contact | |
| Voltage (AC) | 115 V | |
| Current | 20 A | |
| Frequency | 60 Hz | |
| Weight (Not Including Cable) | 1.6 lb | |
| Size (LWH) | 4-7/8 x 2 x 5-3/4 in | |
| Material | High strength impact-resistant polycarbonate | |
| Ground Cable | #4 x 15 Ft. (One Each) | |
| Gun Extension Set | #4 x 18/2 x 35 Ft. (Direct to Gun) | |
| Stud to Base Weld Area | No Special Requirements | |
|
|
||
