Midwest Fasteners, Inc.
Midwest Fasteners, Inc.
450 Richard St.
Miamisburg, OH 45342
Toll-Free: 800-852-8352
Phone: 937-866-0463
Fax: (937) 866-4174
Email: sales@midwestfasteners.com
Website: www.midwestfasteners.com
Print Back
The CD700 from Midwest Fasteners is designed specifically for the insulation contractor. In fact, it is one of the most powerful capacitor discharge units available today. The CD700 features a separate cup head weld pin contact mode that welds to materials as thin as 20 gauge – without fear of burn through. A unique feature is the 84,000 to 168,000 MFD variable capacitance high/low power range switch which handles the toughest applications. The high power range helps eliminate surface preparation when welding “Power Tip” pins from Midwest Fasteners.

Compliances & Standards
 A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)
Unit of Measure

Key Features

Weld System

 N/A CD 700

Maximum Weld Diameter

N/A M10

Maximum Weld Diameter (Fraction)

 N/A 3/8 in

Maximum Weld Diameter (Decimal)

 N/A 0.375 in

Minimum Weld Length

 N/A 6 mm

Weldable Material

 N/A Aluminum Mild Steel Stainless

Incoming Power (Voltage)

 N/A 115 V

Special Features Available

N/A Cuphead (Mini-Cup) Pins

Specifications

Minimum Weld Length (Decimal)

 N/A 0.250 in

Minimum Weld Length (Fraction)

 N/A 1/4 in

Width

 N/A 13-1/2 in

Depth

 N/A 21 in

Height

 N/A 9 in

Weight

 N/A 66 lb

Weld Rate

 N/A Up to 14/min

Pin/Stud Range

 N/A 14 GA. thru 3/8" Dia. Weld Base

Weld Voltage (DC)

 N/A 34 to 175 V

High Capacitance

 N/A 168,000 µF

Low Capacitance

 N/A 84,000 µF

Weld Mode

 N/A Contact Cuphead

Stud to Base Weld Area

 N/A No Special Requirements

Secondary Features

Backside Marking on Thinner Material

 N/A Unacceptable

Minimum Material Thickness

 N/A 0.03125 in (22 gauge) 0.6 mm (22 gauge)

Weld Penetration

 N/A Surface Weld, Fail-in-fastener Minimum

Power Requirement

Voltage (AC)

 N/A 115 V

Current

 N/A 30 A

Frequency

 N/A 60 Hz

Weld Gun (CD-2P Precision)

Weight (Not Including Cable)

 N/A 1-1/2 lb

Size (LWH)

 N/A 6-1/2 x 2 x 5-3/4 in

Material

 N/A High strength impact-resistant polycarbonate

Cables

Ground Cable

 N/A #1 x 15 Ft. (One each)

Gun Extension Set

 N/A #1 x 18/2 x 35 ft (Direct to Gun)