MIDWEST Fasteners' basic pin welder, is a solid-state Capacitor Discharge stud welder. Capable of welding Weld Pins and Weld Studs up to 1/4" weld base in Mild Steel, Stainless & Aluminum materials, EAGLE's standard features make it both portable and flexible for all standard applications.
Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)
Weld System |
N/A Eagle |
Maximum Weld Diameter |
N/A M6 |
Maximum Weld Diameter (Decimal) |
N/A 0.250 in |
Maximum Weld Diameter (Fraction) |
N/A 1/4 in |
Minimum Weld Length |
N/A 6 mm |
Minimum Weld Length (Decimal) |
N/A 0.250 in |
Minimum Weld Length (Fraction) |
N/A 1/4 in |
Weldable Material |
N/A Aluminum Mild Steel Stainless |
Incoming Power (Voltage) |
N/A 115 V |
Backside Marking on Thinner Material |
N/A Unacceptable |
Minimum Material Thickness |
N/A 0.03125 in (22 gauge) 0.6 mm (22 gauge) |
Weld Penetration |
N/A Surface Weld, Fail-in-fastener Minimum |
Width |
N/A 10 in |
Depth |
N/A 13 in |
Height |
N/A 8-1/2 in |
Weight |
N/A 26 lb |
Weld Rate |
N/A Up to 20/min |
Pin/Stud Range |
N/A 14 GA. thru 1/4" Dia. Weld Base |
Weld Voltage (DC) |
N/A 35 to 175 V |
Capacitance |
N/A 70,000 µF |
Weld Mode |
N/A Contact |
Stud to Base Weld Area |
N/A No Special Requirements |
