MIDWEST's standard Cuphead portable, the TALON includes all the features of the EAGLE pin system, plus Cuphead components and capability making this one of the key Insulator machines in the MIDWEST line.
Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)
Item # |
Maximum Weld Diameter |
Maximum Weld Diameter (Decimal) |
Maximum Weld Diameter (Fraction) |
Minimum Weld Length |
Minimum Weld Length (Decimal) |
Minimum Weld Length (Fraction) |
Weldable Material |
Incoming Power (Voltage) |
Special Features Available |
Backside Marking on Thinner Material |
Weld Penetration |
Width |
Depth |
Height |
Weight |
Weld Rate |
Pin/Stud Range |
Weld Voltage (DC) |
Capacitance |
Weld Mode |
Weight (Not Including Cable) |
Size (LWH) |
Material |
Ground Cable |
Gun Extension Set |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CDSW-007-01 | N/A M6 | N/A 0.250 in | N/A 1/4 in | N/A 6 mm | N/A 0.250 in | N/A 1/4 in | N/A Aluminum Mild Steel Stainless | N/A 115 V | N/A Cuphead (Mini-Cup) Pins | N/A Unacceptable | N/A Surface Weld, Fail-in-fastener Minimum | N/A 10 in | N/A 13 in | N/A 8-1/2 in | N/A 29 lb | N/A Up to 20/min | N/A 14 GA. thru 1/4" Dia. Weld Base | N/A 35 to 175 V | N/A 70,000 µF | N/A Contact Cuphead | N/A 1.6 lb | N/A 4-7/8 x 2 x 5-3/4 in | N/A High strength impact-resistant polycarbonate | N/A #4 x 15 ft (One Each) | N/A #4 x 18/2 x 35 ft (Direct to Gun) |
