Stud Welding Range

• 10 gauge (3mm) through ½” (M14) diameter studs

• Single-Phase Transformer, Rectifier
• Variable Voltage Input 208/230/460
• Continuous Current Control up to 900Amps
• Continuous Time Control .05 to 0.7 seconds
• Solid-State Circuitry
• Wheel-mounted, heavy-gauge Steel case with Handle
• Tool-box on-board
• Complete System includes Standard Duty Weld Gun, Ground Cable, and Extension Cable Set.

Stud Welding Range

• 10 gauge (3mm) through 5/8” (M16) diameter studs

• Three-Phase Transformer, Rectifier
• Variable Voltage Input 230/460/575
• Continuous Current Control up to 1200Amps
• Continuous Time Control .05 to 1.0 seconds
• Solid-State Circuitry
• Manual Welding function capable
• Complete System includes Standard Duty Weld Gun, Ground Cable, and Extension Cable Set.

Stud Welding Range

• #10 (3/16” or M4) through 7/8” (M22) diameter studs

• Three-Phase Transformer, Rectifier
• Variable Voltage Input 230/460/575
• Continuous Current Control up to 1800Amps
• Continuous Time Control .05 to 1.7 seconds
• Solid-State Circuitry
• Manual Welding function capable
• Complete System includes Heavy Duty Weld Gun, Ground Cable, and Extension Cable Set.

Stud Welding Range

• 10 gauge (3mm) through 5/8” (M16) diameter studs; based on Power Supply used

• Timer/Control Stud System; requires sufficient DC Power source and OCV.
• Lightweight and rugged Steel enclosure
• Solid State Timer
• Power on switch and front panel fuse
• Complete System includes Standard Duty Weld Gun, Ground Cable, Extension Cable Set and Generator Cable.
• Non-standard, Non-Stock system. Availability and parts substitution may be required at time of manufacture.