Stud Welding Range
  • #10 (3/16” or M4) through 7/8” (M22) diameter studs
Standard Features
  • Three-Phase Transformer, Rectifier
  • Variable Voltage Input 230/460/575
  • Continuous Current Control up to 1800Amps
  • Continuous Time Control .05 to 1.7 seconds
  • Solid-State Circuitry
  • Manual Welding function capable
  • Complete System includes Heavy Duty Weld Gun, Ground Cable, and Extension Cable Set.
Unit of Measure

Key Features

Weld System

N/A UA 1800

Maximum Weld Diameter

N/A M22

Maximum Weld Diameter (Decimal)

N/A 0.875 in

Maximum Weld Diameter (Fraction)

N/A 7/8 in

Minimum Weld Length

N/A 20 mm

Minimum Weld Length (Decimal)

N/A 0.750 in

Minimum Weld Length (Fraction)

N/A 3/4 in

Weldable Material

N/A Aluminum Mild Steel Stainless


Incoming Power (Voltage)

N/A 230 V460 V575 V


N/A 22-1/4 in


N/A 40 in


N/A 30 in


N/A 650 lb

Stud to Base Weld Area

N/A Air/Fluid "Tight"

Secondary Features

Backside Marking on Thinner Material

N/A Acceptable

Minimum Material Thickness

N/A 0.109 in (12 gauge) 3 mm (12 gauge)

Weld Penetration

N/A Penetration Weld, Structural Strength

Your Single Source Stud Welding Specialists

Contact Us