The CD700 from Midwest Fasteners is designed
specifically for the insulation contractor. In fact, it is one
of the most powerful capacitor discharge units
available today. The CD700 features a separate cup
head weld pin contact mode that welds to materials as
thin as 20 gauge – without fear of burn through. A
unique feature is the 84,000 to 168,000 MFD
variable capacitance high/low power range switch
which handles the toughest applications. The high
power range helps eliminate surface preparation when
welding “Power Tip” pins from Midwest Fasteners.
Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)
Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)
Unit of Measure
Key Features
|
Specifications
|
Secondary Features
|
Power Requirement
|
Weld Gun (CD-2P Precision)
|
Cables
Key Features
Weld System |
N/A CD 700 |
Maximum Weld Diameter |
N/A M10 |
Maximum Weld Diameter (Fraction) |
N/A 3/8 in |
Maximum Weld Diameter (Decimal) |
N/A 0.375 in |
Minimum Weld Length |
N/A 6 mm |
Weldable Material |
N/A Aluminum Mild Steel Stainless |
Incoming Power (Voltage) |
N/A 115 V |
Special Features Available |
N/A Cuphead (Mini-Cup) Pins |
Specifications
Minimum Weld Length (Decimal) |
N/A 0.250 in |
Minimum Weld Length (Fraction) |
N/A 1/4 in |
Width |
N/A 13-1/2 in |
Depth |
N/A 21 in |
Height |
N/A 9 in |
Weight |
N/A 66 lb |
Weld Rate |
N/A Up to 14/min |
Pin/Stud Range |
N/A 14 GA. thru 3/8" Dia. Weld Base |
Weld Voltage (DC) |
N/A 34 to 175 V |
High Capacitance |
N/A 168,000 µF |
Low Capacitance |
N/A 84,000 µF |
Weld Mode |
N/A Contact Cuphead |
Stud to Base Weld Area |
N/A No Special Requirements |
Secondary Features
Backside Marking on Thinner Material |
N/A Unacceptable |
Minimum Material Thickness |
N/A 0.03125 in (22 gauge) 0.6 mm (22 gauge) |
Weld Penetration |
N/A Surface Weld, Fail-in-fastener Minimum |
