Midwest Fasteners, Inc.
Midwest Fasteners, Inc.
450 Richard St.
Miamisburg, OH 45342
Toll-Free: 800-852-8352
Phone: 937-866-0463
Fax: (937) 866-4174
Email: sales@midwestfasteners.com
Website: www.midwestfasteners.com
Print Back
Stud Welding Range
  • 10 gauge (3mm) through ½” (M14) diameter studs
Standard Features
  • Single-Phase Transformer, Rectifier
  • Variable Voltage Input 208/230/460
  • Continuous Current Control up to 900Amps
  • Continuous Time Control .05 to 0.7 seconds
  • Solid-State Circuitry
  • Wheel-mounted, heavy-gauge Steel case with Handle
  • Tool-box on-board
  • Complete System includes Standard Duty Weld Gun, Ground Cable, and Extension Cable Set.
Unit of Measure

Key Features

Weld System

 N/A UA 500

Maximum Weld Diameter

N/A M12

Maximum Weld Diameter (Fraction)

 N/A 1/2 in

Maximum Weld Diameter (Decimal)

 N/A 0.500 in

Minimum Weld Length

 N/A 20 mm

Minimum Weld Length (Fraction)

 N/A 3/4 in

Minimum Weld Length (Decimal)

 N/A 0.750 in

Weldable Material

 N/A Aluminum Mild Steel Stainless

Specifications

Incoming Power (Voltage)

 N/A 230 V460 V575 V

Width

 N/A 16 in

Depth

 N/A 16 in

Height

 N/A 41 in

Weight

 N/A 150 lb

Stud to Base Weld Area

 N/A Air/Fluid "Tight"

Secondary Features

Backside Marking on Thinner Material

 N/A Acceptable

Minimum Material Thickness

 N/A 0.109 in (12 gauge) 3 mm (12 gauge)

Weld Penetration

 N/A Penetration Weld, Structural Strength