• Talon Capacitor Discharge CD Weld Stud System

MIDWEST's standard Cuphead portable, the TALON includes all the features of the EAGLE pin system, plus Cuphead components and capability making this one of the key Insulator machines in the MIDWEST line.

Compliances & Standards
A-A-59331 (Military Specification: Stud Welding Systems with DC Integral Power Source and Control Unit)

1 - 1 of 1 | Results Per Page | View | Unit of Measure
1 
Request Information

Item #

Maximum Weld Diameter

Maximum Weld Diameter (Decimal)

Maximum Weld Diameter (Fraction)

Minimum Weld Length

Minimum Weld Length (Decimal)

Minimum Weld Length (Fraction)

Weldable Material

Incoming Power (Voltage)

Special Features Available

Backside Marking on Thinner Material

Weld Penetration

Width

Depth

Height

Weight

Weld Rate

Pin/Stud Range

Weld Voltage (DC)

Capacitance

Weld Mode

Weight (Not Including Cable)

Size (LWH)

Material

Ground Cable

Gun Extension Set

N/A M6 N/A 0.250 in N/A 1/4 in N/A 6 mm N/A 0.250 in N/A 1/4 in N/A Aluminum Mild Steel Stainless N/A 115 V N/A Cuphead (Mini-Cup) Pins N/A Unacceptable N/A Surface Weld, Fail-in-fastener Minimum N/A 10 in N/A 13 in N/A 8-1/2 in N/A 29 lb N/A Up to 20/min N/A 14 GA. thru 1/4" Dia. Weld Base N/A 35 to 175 V N/A 70,000 µF N/A Contact Cuphead N/A 1.6 lb N/A 4-7/8 x 2 x 5-3/4 in N/A High strength impact-resistant polycarbonate N/A #4 x 15 ft (One Each) N/A #4 x 18/2 x 35 ft (Direct to Gun)
1 - 1 of 1 | Results Per Page | View | Unit of Measure
1 

Your Single Source Stud Welding Specialists

Contact Us