Your Single Source Stud Welding Specialists
Stud Welding Range
  • 10 gauge (3mm) through 5/8” (M16) diameter studs
Standard Features
  • Three-Phase Transformer, Rectifier
  • Variable Voltage Input 230/460/575
  • Continuous Current Control up to 1200Amps
  • Continuous Time Control .05 to 1.0 seconds
  • Solid-State Circuitry
  • Manual Welding function capable
  • Complete System includes Standard Duty Weld Gun, Ground Cable, and Extension Cable Set.

Arc Welders

ARC Weld Equipment

Unit of Measure



N/A 22-1/4 in


N/A 35-3/4 in


N/A 30 in


N/A 500 lb

Weldable Diameter

N/A 10 gauge through 5/8" (3 mm) through (M16)

Fastener Length

N/A 20 mm - Unlimited 3/4" - Unlimited

Weldable Materials

N/A Aluminum Mild Steel Stainless Steel

Thickness of Weldable Material

N/A 13 gauge (0.109") - Unlimited 3 mm - Unlimited

Incoming Voltage (AC)

N/A 230 V460 V575 V

Weld Type

N/A Penetration/Structural

Backside Marking

N/A Acceptable

Stud to Base Weld Area

N/A Penetration/Structural

Stud Welding Properties

Standard Features

N/A 1 stud welding gun with legs and foot piece 25 ft. (7.62m) of 1/0 ground cable with "C" clamp 50 ft. (15.24m) of 1/0 combination cable

Welding Range

N/A 10 gauge (3mm) through 5/8" (M16) diameter studs

Duty Cycle

N/A 1/2" (M14) 14/min. 3/8" (M10) and less – unlimited 5/8" (M16) 10/min.

Manual Welding Properties


N/A 450 Amps at 38V 60%

Welding Range

N/A 20 to 590 Amps
© 2018, Midwest Fasteners.Site created by Thomas Web Solutions and powered by Navigator Platform