Stud Welding Range
- 10 gauge (3mm) through 5/8” (M16) diameter studs
- Three-Phase Transformer, Rectifier
- Variable Voltage Input 230/460/575
- Continuous Current Control up to 1200Amps
- Continuous Time Control .05 to 1.0 seconds
- Solid-State Circuitry
- Manual Welding function capable
- Complete System includes Standard Duty Weld Gun, Ground Cable, and Extension Cable Set.
Unit of Measure
Key Features
|
Specifications
|
Secondary Features
|
Stud Welding Properties
|
Manual Welding Properties
Key Features
Weld System |
N/A UA 1000 |
Maximum Weld Diameter |
N/A M16 |
Maximum Weld Diameter (Decimal) |
N/A 0.625 in |
Maximum Weld Diameter (Fraction) |
N/A 5/8 in |
Minimum Weld Length |
N/A 20 mm |
Weldable Material |
N/A Aluminum Mild Steel Stainless |
Specifications
Minimum Weld Length (Decimal) |
N/A 0.750 in |
Minimum Weld Length (Fraction) |
N/A 3/4 in |
Incoming Power (Voltage) |
N/A 230 V460 V575 V |
Width |
N/A 22-1/4 in |
Depth |
N/A 35-3/4 in |
Height |
N/A 30 in |
Weight |
N/A 500 lb |
Stud to Base Weld Area |
N/A Air/Fluid "Tight" |
Secondary Features
Backside Marking on Thinner Material |
N/A Acceptable |
Minimum Material Thickness |
N/A 0.109 in (12 gauge) 3 mm (12 gauge) |
Weld Penetration |
N/A Penetration Weld, Structural Strength |
Stud Welding Properties
Standard Features |
N/A 1 stud welding gun with legs and foot piece 25 ft. (7.62m) of 1/0 ground cable with "C" clamp 50 ft. (15.24m) of 1/0 combination cable |
Welding Range |
N/A 10 gauge (3mm) through 5/8" (M16) diameter studs |
Duty Cycle |
N/A 1/2" (M14) 14/min. 3/8" (M10) and less – unlimited 5/8" (M16) 10/min. |
